Oxygen Sensor Supply

description oxygen sensor with 3-pin molex connector. the sensor is supplied in a single package and hermetically sealed; this sensor can certainly be installed on the technomotor, corghi, brain-bee analyzers and on the most common gas analyzers for petrol engines. the sensor must be kept in the hermetically sealed package until it is installed in the exhaust fumes analyzer. at the time of opening of the package, the sensor comes into contact with the oxygen present in the air, and the chemical process begins allowing the operation of the sensor itself and at the same time determines the duration of 12-14 months. the 3-pin molex connector is the connector to which the cable coming from the analyzer must be connected. this connector is recognizable by the presence of 3 pins (contacts) with little more than 1mm distance (1.27mm), one from the other; the presence of a plastic wall near the 3 contacts forces the insertion of the female connector (present on the cable coming from the anal